III. Liner Systems - b.3.2. Eagle Premium Slip Hanger - Hydraulic

The hydraulically set Eagle Premium Slip Hanger by Allamon Tool Company is the premiere hydraulically actuated pocketed slip liner hanger in the industry today. Designed for handling ultra-heavy liners and maximizing fluid by-pass it is the best choice for heavy liners that may require hole reaming in order to get them to bottom. It is set via applied pressure internal to the workstring. There is no required manipulation of the workstring other than simply slacking off onto the slips once the setting pressure is reached. When run in combination with Allamon Tool Company’s plug systems, the setting ball is caught in the plug running tool which means that there is greatly reduced risk in damaging the formation after setting the hanger and releasing the setting ball. This hanger is robustly designed for installation in highly deviated wellbores up to and beyond 90 degrees of deviation and because of the single cone arrangement is rated for use with light to medium liner loads. When run in combination with the DH-1 Liner Running Tool, the liner may be drilled down with the workstring in compression and released hydraulically. Features/Benefits Pocketed slips reduces risk for damage during installation and reaming Semi-slip feature provides better initial ‘bite’ and better load disbursement Provides excellent circulating by-pass area Return piston provides collapse rating equal to that of the liner Setting ball shears out in running tools for lower formation surge Large slip area provides for hanging of ultra-heavy liners Eagle H Premium Slip Size (in.) Cashing Weight (lb/ft) Hanging Capacity (kips) Tieback Sleeve ID (in.) 4-1/2 x 7 26-32 500 5.250 5 x 7 26-32 500 5.250 5-1/2 x 7-5/8 26.4-39 500 5.750 7 x 9-5/8 40-53.5 850 7.375 7-5/8 x 9-5/8 47-53.5 850 7.625 << Eagle Premium Slip Hanger – Mechanical