III. Liner Systems - b.1.2. Eagle Single Cone Hanger Hydraulic

Allamon Tool Company’s most basic hydraulically actuated liner hanger is the hydraulically set Eagle Single Cone Liner Hanger. It is set via pressure internal to the workstring. There is no required manipulation of the workstring other than simply slacking off onto the slips once the setting pressure is reached. When run in combination with Allamon Tool Company’s plug systems, the setting ball is caught in the plug running tool which means that there is greatly reduced risk in damaging the formation after setting the hanger and releasing the setting ball. This hanger is robustly designed for installation in highly deviated wellbores up to and beyond 90 degrees of deviation and because of the single cone arrangement is rated for use with light to medium liner loads. Features/Benefits Perfect for cost sensitive applications with short liners in deviated wells Semi-slip feature provides better initial ‘bite’ and better load disbursement Provides excellent circulating by-pass area Return piston provides collapse rating equal to that of the liner Setting ball shears out in running tools for lower formation surge Eagle H Size (in.) Cashing Weight (lb/ft) Hanging Capacity (kips) Tieback Sleeve ID (in.) 4-1/2 x 7 26-32 150 5.250 5 x 7 26-32 150 5.250 5-1/2 x 7-5/8 26.4-39 150 5.750 7 x 9-5/8 40-53.5 250 7.375 7-5/8 x 9-5/8 47-53.5 250 7.625 << Eagle Single Cone Hanger – Mechanical